Autonics Photoelectric Sensor, Photoelectric Type BJX10M-TDT-C Web Sling Green The N°12 is a robust

The N°12 is a robust knife for the toughest challenges

Type: Diagonal Cutting Heavy Duty High Leverage Pliers Application: ACSR

05CZA662: SPC cable with data switch (1m / 40”)

75 kA at 440 V AC 50/60 Hz conforming to IEC 60947-2 Suitability for isolation Yes conforming to IEC 60947-2 utilisation category Category A Trip unit name TM-D Trip unit technology Thermal-magnetic Trip unit rating 60 A at 50 °C Protection type Overload protectionShort-circuit protection Pollution degree 3 conforming to IEC 60664-13 conforming to IEC 947-1 Complementary Control type Toggle Mounting mode Fixed mounting support Backplate Upside connection Front downside connection Front Mechanical durability 8500 cycles Electrical durability Category A: 1500 cycles 415 V AC 50/60 Hz conforming to IEC 60947-2 Connection pitch 25 mm local signalling Positive contact indication Neutral protection setting Without protection earth-leakage protection Without height 130 mm Width 75 mm Depth 60 mm Environment Standards EN/IEC 60947-2JIS C8201-2-2EN/IEC 60947-1GB/T 14048

Operating Temperature : -25~100°C

Autonics Photoelectric Sensor, Photoelectric Type BJX10M-TDT-C Web Sling Green The N°12 is a robustSensing type Through beam type Sensing distance 10m Sensing target Opaque material of min. 15mm Light source Red LED(660nm) Response time Max. 1ms Power voltage 10 30VDC 10%(ripple P P: max. 10%) Current consumption Emitter Receiver: Max. 20mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON Dark ON(set by switch) Control output NPN open collector Connection type 4mm, 3 wire, 2m (emitter of through beam type: 4mm, 2 wire, 2m)