Ryoba Saw - 180 mm - No. 291 HT04-07 #8 and #10 screws

#8 and #10 screws

Each tool is approximately 10" long with a 5-1/4" handle

What’s Included:

Positioning range is 7"

(1) #9 Sweep x 1/2" (184610)

Ryoba Saw - 180 mm - No. 291 HT04-07 #8 and #10 screwsThe Razorsaw Ryoba Saw is an all purpose performer has two sets of teethone for ripping and one for crosscutting. Like most Japanese saws, it cuts on the pull stroke, putting the blade in tension for an exceptionally fine, straight cut. Since the kerf is narrow, very little energy is required. Ryobas are often described by blade length (in millimeters), because this usually indicates the saws main uses. In general, shorter saws have finer teeth,