Autonics Photoelectric Sensor, Photoelectric Type BJP100-BDT-P Band Clamp number of cores: 20

number of cores: 20

the operation will vary

Rc (ø25 to ø40) Piping type - standard type cylinder stroke 250 Cylinder stroke 250mm Stroke adjustment unit symbol A Left: A adjustment bolt attachment

* Weight (w / o battery)

60 V DC conforming to EN/IEC 60947-2 Utilisation category Category A conforming to EN 60947-2Category A conforming to IEC 60947-2 Suitability for isolation Yes conforming to EN 60898-1Yes conforming to EN 60947-2Yes conforming to IEC 60898-1Yes conforming to IEC 60947-2 Standards EN 60898-1EN 60947-2IEC 60898-1IEC 60947-2 Quality labels NF Complementary Network frequency 50/60 Hz Magnetic tripping limit 8 x In +/- 20 % [Ics] rated service breaking capacity 50 kA 100 % conforming to EN 60947-2 - 12

Autonics Photoelectric Sensor, Photoelectric Type BJP100-BDT-P Band Clamp number of cores: 20Sensing type BGS reflective type Sensing distance 10 to 100mm Sensing target Opaque Light source Red LED(660nm) Response time Max. 1. 5ms Power voltage 12 24VDC 10%(ripple P P: max. 10%) Current consumption Max. 30mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON Dark ON(set by switch) Control output PNP open collector Connection type Cable type(3. 5, 2m) Environment_Ambient illumination Sunlight: Max. 10,000lx, Incandescent lamp: