Watts LFM116 THD E 20-200 PI 3 - Part of the LFM116 Series ZA100F-4NH Specifications ArmorTek Technology No Backflow

Specifications ArmorTek Technology No Backflow Preventer Type Double Check Valve Assembly Body Finish Cast Bronze Body Material Cast Bronze Body Pattern Inline Brand Watts Bypass No Bypass Size Does Not Apply To Product Cap And Tether No Disc Material Rubber EAN 098268592078 Elbow Fitting No Hazard Protection Level Non Health Hazard Hot And Harsh Water No Hydrant Connection No Inlet Connection Size 1 IN Inlet Connection Type Female Threaded Inlet Shutoff Valve Type Quarter Turn Ball Valve Inlet Thread Type NPT Lead Free NO Maximum Temperature-Fahrenheit 180 Maximum Working Pressure-BAR 12

it’s ideal for directing roof runoff into downspout systems while minimizing leaks and maintenance

This 11″ × 19″ top drain combines strength

Specifications Air Venting No Vent Body Material Cast Iron Body Pattern C-Pattern Bottom Tapping Yes Bottom Tapping Size 1/2 IN Brand Watts Contact Rating Does Not Apply To Product EAN 098268502657 Fastfill Feature No Fill Tapping Size Does Not Apply To Product Float Chamber Connection Size Does Not Apply To Product Flow Rate Does Not Apply To Product Hydronic Item Type Steam Trap Inlet Connection Size 1 1/4 IN Inlet Connection Size-Metric 32 MM Inlet Connection Type Female Threaded Inlet Thread Type NPT Lead Free Not In Scope Maximum Operating Temperature-Fahrenheit 353 Maximum Pressure-PSI 125 Maximum Steam Pressure-PSI 75 Maximum Temperature-Fahrenheit 250 Maximum Working Pressure-PSI 75 Outlet Connection Size 1 1/4 IN Outlet Connection Type Female Threaded Outlet Thread Type NPT Part Number 0037116 Pipe Plug No Pressure Steam Discharge Capacity Does Not Apply To Product Purge And Drain Diameter Does Not Apply To Product Purge And Drain Outlet Size Does Not Apply To Product Series WFT Side Tapping No Side Tapping Size Does Not Apply To Product Strainer No Strainer Material Does Not Apply To Product Switch Type Does Not Apply To Product Temperature Adjustment Range Does Not Apply To Product Temperature Range Does Not Apply To Product Top 1 Tapping Size Does Not Apply To Product Top 2 Tapping Size Does Not Apply To Product Top Tapping No Vacuum Breaker No Venting Capacity Does Not Apply To Product Specification Sheet - WFT

The suspended solids settle out of the slowed flow and are captured by the Dandy Sack prior to entering the inlet

Watts LFM116 THD E 20-200 PI 3 - Part of the LFM116 Series ZA100F-4NH Specifications ArmorTek Technology No BackflowThis 3 inch ACV is armed with ArmorTek, a patented 3 part advanced epoxy coating system designed to limit both microbial induced (MIC) and exposed metal substrate corrosion. This pressure relief control valve is designed to permit flow when upstream pressure is above the adjustable setpoint of the control pilot, and throttle toward closed when upstream pressure falls below the adjustable setpoint. When the valve is installed off the main line on the