10-Hole 2-Way Channel Wing Connector - Electro-Galvanized HLPC/HTPC Beam-To-Column Ties the DTT requires a standard

the DTT requires a standard cut washer (included with DTT2Z) be installed between the nut and the seat

6x beams and 4x posts/columns

Warning: Industry studies show that hardened fasteners can experience performance problems in wet or corrosive environments

Designed with a 16" x 16" right-angle profile

Deck-Drive™ DWP Wood SS Screws

10-Hole 2-Way Channel Wing Connector - Electro-Galvanized HLPC/HTPC Beam-To-Column Ties the DTT requires a standard10 Hole 2 Way Channel Wing Connector Electro Galvanized allows channels to be connected perpendicularly and can be used to create joints along a vertical piece of strut. 8 Hole 2 Way Wing Fittings allow for 2 arms to be created from the T shaped wing fitting. These Wing Fittings have 9 16" punched holes and should be used with like metals. Electro Galvanized Steel should be used in interior applications where conditions are dry, and humidity is low.