Bolthold eAK4 Asphalt Anchor Kit w/ 4 SP10 & Epoxy Grout Deck Nails Code Approved: Recognized for wood-to-concrete

Code Approved: Recognized for wood-to-concrete and wood-to-masonry connections when installed per manufacturer specifications

Use a standard drill/driver with appropriate torque settings

the screw’s tri-lobe thread design and unique cut point drive cleanly into composite and PVC material without splitting or excess board damage

Fastener Requirements: Install using 10d common nails or Simpson Strong-Tie SD screws to achieve full load capacity

Covered patios

Bolthold eAK4 Asphalt Anchor Kit w/ 4 SP10 & Epoxy Grout Deck Nails Code Approved: Recognized for wood-to-concreteThe Bolthold eAK 4 kit provides you with the correct amount of anchors and grout for securing anchors into asphalt. The included SP10 38 anchors are ideal for anchoring bike racks, signs, machinery, and more into asphalt surfaces. The SP10 38 asphalt anchor requires a 7 8" hole that is 6" deep. The length of the bolt inside the anchor should not exceed 3". Each anchor is pre installed with a 1" long hex bolt and a 1" diameter washer. You can load the